2 Results | Showing page: 1 / 1
A reliable electrical connection is the most important thing for safety and comfort at sea. If you have the correct marine sockets, plugs, and cables, your onboard systems will work well in any weather. This includes navigation lights, refrigerators, and battery chargers. We provide a full range of sockets, plugs, and marine-grade cables at Pitter Nautic Shop that are made just for yachts, sailing boats, and motorboats. Our devices are made to last through damp, salt, and vibration, so you can count on them to distribute electricity reliably whether you're plugged into shore power or using your onboard electrical system.
Modern boats need strong electrical connections for important systems like navigation, lighting, communication, and comfort equipment. Even in rough marine settings, our marine sockets and plugs are built to last. We provide everything you need for your boat, like watertight sockets, 12V and 24V outlets, shore power plugs, and charging connectors. We evaluate each item for safety, conductivity, and resistance to corrosion to make sure it will work reliably on every trip.
You can locate all the parts you need to keep your boat's power flow safe and efficient, whether you're improving your shore power arrangement, adding new accessories, or doing a full electrical refurbishment.
When you dock at a marina, you need the right shore power cables and inlet plugs to charge your batteries and run your onboard equipment. We provide a wide choice of products, such as CEE shore power connectors, maritime extension cables, and plug adapters that work with both 16A and 32A systems. All connectors exceed European marine requirements, which means they are safe and waterproof, so there is no risk of electrical problems.
For the most flexibility and protection from UV radiation, oil, and seawater, choose heavy-duty rubberized cables with extra insulation. We also have cable spools for easy storage and locking sockets that keep you from accidentally disconnecting at the dock. A good shore power setup maintains your boat's electrical system steady and your batteries fully charged for your next trip.
Modern yachts need reliable 12V connections and USB outlets for anything from phone chargers and portable coolers to navigation tools. We provide a variety of products, such as dual USB chargers, waterproof 12V power sockets, and panel-mount outlets that are easy to install in cockpits, cabins, or helm stations. All of the outlets have tight-fitting rubber covers that keep moisture and salt away from the contacts. This makes sure that power is safely distributed even when it's wet.
There are 24V outlets for items like air compressors, portable fridges, and inverters that need more power. These strong connectors let you power and charge several items at once while keeping the flow of electricity on your vessel smooth.
Every electrical system on board needs good wiring. Our marine-grade cables have tinned copper conductors that don't rust and work well over extended distances. These cables are great for both tight quarters and open locations because they are insulated with flexible, UV-resistant sheathing. Our cables are sturdy, have low resistance, and last a long time, whether you're wiring a switchboard, connecting a windlass, or putting in lighting systems.
We have power leads that are already terminated, several cable diameters, and color-coded options to make it easy to find what you need. Pair your cables with waterproof connectors and heat-shrink terminals to make sure they are completely protected from moisture and vibration.
Salt and humidity can easily harm regular electrical parts. Our marine plugs and connectors have sealing gaskets, strengthened contacts, and housings that won't rust. That's why. These characteristics make sure that your circuits are safe and waterproof, so they won't short out or get too hot. They work well with both DC and AC systems and are utilized in a wide range of situations, such as charging ports, shore power links, navigation lighting, and deck equipment.
We have anything from two-pin connectors for low-voltage electronics to multi-pin waterproof plugs for complicated systems. It is easy to install each connector, and they are made to last for many uses without losing contact or wearing out. This means that your boat will always have the same electrical performance.
Always check that all parts are rated for marine use and work with your voltage system before putting in new sockets, plugs, or cables. Use marine-grade sealant to seal all deck penetrations and tinned copper wire to keep them from rusting. Use insulated clamps to hold the cables in place so they don't vibrate and come loose.
Check your shore power plugs and outlets often for signs of rust or overheating. If your gaskets or connectors are broken or burned, you should replace them right away. To make your cables last longer, rinse them with clean water after each use and store them neatly coiled in a dry place.
Strong plugs, sockets, and wires not only make your electrical system safer, but they also make life on board more comfortable. Our marine-grade parts make sure that energy is distributed evenly and that the devices are easy to use, whether you need to power important equipment, charge mobile devices, or connect to shore power. All of our products are designed to match the high standards of modern sailing by being both useful and long-lasting.
At Pitter Nautic Shop, we are proud to offer maritime electrical solutions that have been tested for safety, performance, and compliance with international standards. Our experts can help you pick the best marine sockets, shore power connectors, and boat cables for your boat, whether you're refitting it or installing new ones.
Pitter Nautic Shop has been working on yachts and marine electronics for decades, so you can trust them to provide safe, efficient, and dependable electrical parts. We only sell sockets, plugs, and cables that are easy to install, conduct electricity well, and can handle the weather. Our marine-grade equipment make sure you always have power, whether you own a private sailboat or run a professional charter fleet.
We only sell high-quality accessories that have been tested in real-life marine settings. Our products, which include shore power extension sets, USB sockets, and multi-pin waterproof connections, meet or surpass the needs of even the most demanding sailors. For electrical safety and performance you can count on every time you go, choose Pitter Nautic Shop.
The best marine sockets and plugs are those designed with waterproof seals, corrosion-resistant contacts, and UV-stable housings. Always choose certified marine-grade connectors that are rated for 12V or 24V systems and meet international standards for use in wet or outdoor environments.
No, household electrical components are not suitable for marine use. Boats require marine-grade cables with tinned copper conductors and flexible insulation designed to resist vibration, saltwater, and heat. Always use certified marine plugs and sockets to ensure safe and reliable operation on board.
Inspect your shore power cables and connectors before each use. Look for cracks, discoloration, or signs of overheating. Replace cables immediately if you notice damage or corrosion. For safety, it’s recommended to replace frequently used cables every few seasons, depending on exposure and use.
12V outlets are commonly used for smaller accessories like chargers, lights, and electronics, while 24V outlets power heavier equipment such as fridges, winches, and compressors. Make sure your devices match the outlet voltage to prevent damage or inefficient operation.
Pitter Nautic Shop offers a curated selection of marine electrical components including sockets, plugs, cables, and connectors built to withstand marine conditions. Our products are trusted by professional sailors and boatyards for their durability, safety, and easy installation. We also provide expert guidance to help you find the perfect fit for your boat’s electrical setup.
Pitter putnička agencija d.o.o.
Tkon 88
23212 Tkon, Croatia
Office Hours:
8:00 am - 3:00 pm (Mon - Fri)
8:00 am - 1:00 pm (Sat)
Phone: +385 23 687 494
E-mail: Pitter Croatia
For specific kind of requests, please choose form from links below:
